#1 . Low Beam Relay. #2 . High Beam Relay. #3 . Blower motor relay 3rd Speed - Heating / Ventilation / A/C. #4 .Blower motor relay 4th Speed - Heating / Ventilation / A/C. #5 Interior
Lamp Delay Unit. #6 Cooling fan relay. ( Radiator ) #7 Fan Fail Module-for Cooling Fans. #8 Not
Used #9 . A/C Panel Illumination Resistor. #10 Starter Relay. #11 A/C Panel Illumination relay
#12 .Lambda relay. #13 Rear Defog Timer. #14 Door Lock Module. #15 Door Lock Circuit
Breaker. #16 RPM / fuel pump relay. #17 Accessory Relay. #18 Main Relay. #19 Fuse Panel
#20 Blower motor circuit breaker. #21 Cooling fan circuit breaker.
#22 A/C Override Diode.
( Caution) Since the circuit breakers can be un plugged, they can also be swapped out.
The 35 amp is the cooling fans CB has 2 wires and the 25 amp blower motor CB has 4 wires.
Relay Description Fuse Description / Location
Other things to consider replacing for a better and more reliable De Lorean.
# 1. Make sure you have a good battery, 850 CCA or better. It all starts with a good electrical system
#2. The alternator. If it's the original Motorola or Ducy, it's 20 years old. Replace with our DeLorean 150 or equal on our alternator page.
#3. Up date the circuit breakers for the fans. See our electrical page.
#4. Up date the relays as described to the right.
#5. Tune up, plugs, wires, rotor & cap, See Engine Parts .
Fan Fix placement.
Relays to update
From left to right of the front relay rack / row. #7-Blue, Fan fail Relay / Module,
Replace wit h The Fan Fix or The Fan fail fix. See on modification page.
#6-Cooling Fan relay, Replace with
Mini Brute, Maxi Brute
or The New Fan Fix dual 2 x 2.
Relay Kit replacement.
#1 - Low Beam head lamp,
#2 - High Beam head lamp.
#3 - 3rd fan speed blower motor.
#4 - 4th fan speed blower motor.
#10 - Start Inhibit relay.
#11- A/C Illumination.
#12 - Lambda fuel relay.
Repl. w/( Silver top)
#20 - Blower Motor up grade to 30Amp.
Repl if needed.
#21 -Cooling fan 's if used upgrade to
40 amp. Repl if needed.
#14 - Lock module circuit breaker.
Can us a 10,15,20 amp. Repl if needed.
Note Shown is the relay under the engine
cover on the back fire wall by the
resistors for the coil. If it's the original
silver looking top, I would replace with one of the black relays.
We include it in our relay kit.